The CMBecker International Inline Flow Control 10mm Barb is necessary for those looking to use tubing that has an inner diameter of 3/8". It is slightly smaller than 1/2", but it will fit a 1/2" ID Hose if properly clamped.
-
Use with CMBecker In-Line Flow Control Compensator
-
Stainless steel nipple, only stainless steel touches your beverage
-
Works with CMBecker International shanks.
-
Includes CMBecker beer nut
-
The size is 10mm which is between 1/2" and 3/8". When using with 3/8" hose you may need to slightly heat hose (using hot water) to stretch hose over barb (this is how we do it!) When using with 1/2" it will be loose, but we have used it with syphon hose and thicker high heat (EJ beverage or silicone) hose. Just make sure you clamp it properly to get a good seal.
-
This will not work with a standard shank, it works with CMBecker shanks
| Item # |
D1235G |
| Weight |
0.04
LBS
|
